UMA 1000.5Y Automatic Mass Comparator
UMA 1000.5Y comparators represent the highest class of professional-level automatic mass comparators. They enable comparisons of mass standards as low as 100 to 1000 g in class E1 and 10 to 1000 g in lower classes. The unit is manufactured in a 18-position version – it has a storage for 18 mass standards. The versatility of this solution makes it possible to compare both entire sets of mass standards in one process and just a few standards of the same mass.
Best Repeatability of Measurements in a Short Time
The UMA automatic comparators feature the best repeatability of measurements, thanks to the elimination of the “human factor”, air drafts and temperature changes. The consistent design of the device means that the mass standards are close together, reducing calibration time to a minimum.
Universal Insert Shape
The design of the insert enables very small masses to be weighed with very high accuracy and protects the mass standard from jamming. The UMA automatic comparators allow the comparison of all known shapes of mass standards, even wires, using a single universal insert.
Measurement of Ambient Conditions Directly in the Weighing Chamber
The UMA Automatic Mass Comparator is equipped with a high-end thermo-hygrobarometer, which enables real-time testing of ambient conditions. The device features very high measurement readability: pressure at 0.001 hPa, humidity at 0.01% and temperature at 0.001°C.
Real-Time Vibration Measurement
Thanks to a vibration sensor inside the electronics, the UMA series comparators analyse and identify the source of vibration. The sensor makes it possible to determine whether vibrations from the ground or other sources affect the measurement result.
Compact Design
The UMA series comparators have been designed to be adaptable to any laboratory environment. The devices’s dimensions allow it to be placed on a standard-sized anti-vibration table.
Built-in Assistant for Setting the Mass Standards
Additional software supervises the insertion of mass standards into the comparator’s magazine; thus, the same item will not be used several times.
Dedicated Software
Friendly and functional software means that the entire calibration plan takes only a few minutes to prepare. As the software allows you to memorise the comparison plans, you can use them again and again, saving you time.
The comparator saves all comparator reports and ambient conditions in dedicated databases. This means easy access to the data and speeds up its ripping as a printout.
Albanian
Danish
Nederlandse
Estonian
Finnish
Hungarian
Icelandic
Kazakh
Latvian
Lithuanian
Macedonian
Norwegian
Portuguese
Romanian
Russian
Slovak
Slovenian
Swedish
Ukrainian
Serbian
Montenegrin
Deutsch
Español
Français
Italiano
Japanese (日本語)
Polski
Türkiye
Česky
Português (Brasil)
USA
中文
