Mass Comparator 2100kg d:10 g HRP 2000.5Y.KB

HRP 2000.5Y.KB Mass Comparator

If you are looking for a comparator that enables you to calibrate mass standards and weights according to OIML (R-111) recommendations for class M1 and lower, the HRP 5Y.KB Manual Mass Comparators are the devices for you. Our comparators ensure the traceability of mass measurements and are therefore widely used in calibration laboratories around the world.

You Have Full Control over the Comparison

Manual comparators give the operator full control over the comparation process – it is he/ she who places the weight on the pan. To make this task easier, we have provided the steel weighing platform with centring rings enabling precise positioning of the weights.

Stable Platform Plus Advanced Terminal

The HRP 5Y.KB mass comparators consist of a weighing terminal and a weighing platform, which is a new mechanical design of electromagnetic mechanism housed within a tight steel casing. The high-tech 5Y terminal is equipped with a 10’ colour touchscreen display and communication interfaces: 2×USB-A, USB-C, HDMI, Ethernet, Wi-Fi^® and Hotspot.

The terminal software will allow you to:

Monitor ambient conditions, automatic levelling, adjustment, USP compliance and ioniser operataion as part of the Digital Weighing Auditor (DWA^®)
Verify the user in 4 ways and safely log off
Communicate via Ambient Light alerts and voice commands
Leave text Live Notes

and more.

Comparison Is a Lot, but Not Everything

The HRP 5Y.KB mass comparators work with a wide range of devices and accessories as well as software, which you will also find in our portfolio. These include:

Receipt printers
Barcode scanners
Fingerprint reader
Stands, wall mounting kits and mounting brackets
RFID* tags
RAD KEY software
RMCS System
RMCS Lite software
THBR 2.0 System
Additional modules (RES Radwag Extended SI Module and CFR 21 Part 11 Compliance Module)
RS 232 and RS 485 cables
Protective covers for the terminal.

* RFID ISO/IEC 14443 Type A, 13.56 MHz

Wi-Fi^® is a registered trademark of Wi-Fi Alliance^®.

Datasheet

M1 Calibration Range	500 – 2000 kg
M2 Calibration Range	500 – 2000 kg
Maximum capacity [Max]	2100 kg
Readability [d]	10 g
Standard repeatability [5% Max]	8 g
Standard repeatability [Max]	12 g
Permissible repeatability	15 g
Linearity	±120 g
Eccentricity (tested load)	0.5d / 1 mm
Electric compensation range	0 – +2100 kg
Stabilization time	10 s
Adjustment	internal (automatic)
Display	10″ graphic colour touchscreen
Weighing pan dimensions	1250×1000 mm
Controling device dimensions	249×170×72 mm
Packaging dimensions W x D x H	1500×1250×615 mm
Net weight/gross weight (comparator)	300 / 400 kg
Recommended load speed	0.3 m/min
Communication interface	2×USB-A, USB-C, RS 232 (COM3), HDMI, Ethernet, Wi-Fi^®, Hotspot
Operating temperature	+15 – +30 °C
Operating temperature change rate	±2 °C / 12 h
Relative humidity	40% – 60%
Relative humidity change rate	±10% / 4 h

Repeatability is expressed as a standard deviation determined for 6 ABBA cycles. Standard deviation is experimentally determined under ambient conditions for calibration of F2 class mass standards specified in OIML R111 (Table C.1.) document.

Videos

Remote VPN Support on ELLIPSIS Balances

ELLIPSIS – Unlimited Connections

310 ELLIPSIS – Scan or Tap to Log In

ELLIPSIS – New Balance by RADWAG

ELLIPSIS – Cutting Edge, Innovative, New

Precision and Working Comfort – Operating RADWAG Balances in Every Glove!

5Y Balance and Barcode Scanner – Easy Connection

New Menu Language in 5Y Series Balances: Japanese

RMCS - Radwag Mass Comparator System

HRP KO manual mass comparator

RADWAG Mass comparators