C315.P.60 Paketler için Posta Terazisi

Português (Brasil)Deutsch English Español Français Italiano Japanese (日本語)Polski Türkiye Česky USA

Scan model

Ana Sayfa > Ürün > Endüstriyel teraziler > Posta Teraziler > Paketler için Posta Teraziler > C315.P.60 Paketler için Posta Terazisi

This image is for reference only.

C315.P.60 Paketler için Posta Terazisi

Ürün kodu: WP-106-0008

Maksimum yük [Max]: 60 kg
Okuma doğruluğu [d]: 20 g

Modelleri seç:

✓ C315.P.60 Paketler için Posta Terazisi

✓ Select all

Paketler için Posta Terazisi

Posta terazi, tüm ölçüm aralığında çoklu dara alma imkânı ile paketleri tartmak için tasarlanmıştır.

Cihaz,

tartım platformunun arka tarafına tutturulmuş bir sütun üzerine monte edilmiş, arkadan aydınlatmalı bir LCD ekrana sahip olan PUE C315 serisi indikatöre sahiptir.

Ek olarak, terazi bir müşteriye ölçüm sonucunu gösteren ikinci bir ekran ile donatılmıştır. Terazinin doğrulanmamış versiyonu ek fonksiyonlar içerir: tepe değer tutma ve Newton biriminde ölçme.

Terazi şebeke veya batarya ile çalışır,

isteğe bağlı olarak terazi RS 232 çıkışı ile donatılabilir. PUE C315 serisi indikatör bu terazinin standart ekipmanıdır.

Teknik Veriler

Maksimum yük [Max]	60 kg
Minimum yük [Min]	100 g
Okuma içinğruluğu [d]	20 g
Yasallaştırma birimi [e]	20 g
Dara aralığı	-60 kg
Ticari amaçla kullanılmayan terazi için maksimum hassasiyet	-
OIML sınıfı	III
Display	4,3” LCD (aydınlatma ile)
Tartım kefesi boyutları	400×500 mm
Ambalaj boyutları G x D x Y	720×620×210 mm
Net ağırlık	15,5 kg
Brüt ağırlık	17,8 kg
IP Sınıfı	IP 65 konstrüksiyon, IP 43 terminal
Konstrüksiyon	toz kaplı çelik St3S
Tartım kefesi	Paslanmaz çelik AISI304
Haberleşme arayüzü	RS232
Opsiyonel arayüzler	RS232
Güç kaynağı	100 – 240 V AC 50/60 Hz + batarya
Maksimum güç tüketimi	5 W
Batarya ile çalışma süresi	max 8h
Çalıştırma sıcaklığı	0 – +40 °C
Depolama sıcaklığı	-10 – +50 °C
Atmosferik nem	10% – 85% RH yoğunlaşma yok
İndikatör	C315

Additional fee
for verification

Fonksiyonlar

Plus/Minus Control

Control of sample's mass carried out with reference to specified MIN and MAX thresholds. The weight is considered to be correct if it is comprised within threshold values. A graphic visualisation of weighing result is displayed in a form of a bar graph.

Percent Weighing

Percent Weighing function is used for comparision of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly exceeded.

Totalizing

Function adding new mass value to already obtained one. This allows to determine mass content of the mixture, being a composition of number of different consistence components. Totalizing is limited by maximum capacity parameter.

Parts counting

Function using mass measurement for determination of measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass / single item mass = quantity. Function operation is supperted by a mechanism of Automatic Correction of Accuracy. This allows to update single item mass in course of the process. To a certain extend Automatic Correction of Accuracy eliminates error which may be a result of different mass values of seemingly alike single elements. For industry solutions items counting may be simultaneously carried out with checkweighing and dosing thus industry solutions feature audio signalling base informing that specified number of items has been weighed. It is possible to apply weighing systems using few platfroms of different MAX capacities and different accuracies.

Internal battery

Internal and rechargeable battery of SLA 6 V type (sealed lead acid) enables device operation without connecting the device to the mains (9h operation). The weighing instrument controls battery status and displays a respective pictogram on the screen.

Peak hold

Function registering the greatest temporary indication occurring in course of the weighing process. It is most often used in medical scales in order to hold the measurement indication.

GLP Procedures

Diagnostic function allowing to objectively document performed measurements. GLP procedures may be either presented in a short report form or extended one.

Animal weighing

Process of mass determination for a product which may unwillingly reposition within the weighing pan. Mass determination in such cases requires much longer period of time when compared to typical weighing process. It is the user who defines period of time needed for control of measured product mass. The user can thus optimize the function depending on the measured product characteristics.

ALIBI Memory

"ALIBI" memory enables saving and storing up to 100000 measurements. Measurements are saved automatically upon each pressing of the key. There is no need for any additional operations or changing settings.
The following data related with the measurements is saved: measurement date; measurement time; result (mass); tare value; operator carrying out the measurement (logged in); product name.
The software saves the measurement in a so called loop, i.e. when the measurement no. 100001 is saved, the measurement 1 gets automatically deleted from the memory.
Measurements saved to balance memory cannot be deleted.
You can preview and print out the data saved to the ALIBI database.

Dokümantasyon

Data Sheet

Bakış

İndirme

Choose more product:
Bakış

Bakış

İndirme

Aksesuarlar

P0108 Cable

PT0443 Cable

P0108.5 Cable

RS 232 cables (scale - printer)