Wägeterminal PUE C32

Gehäuse und Display

Das Gehäuse wird aus sehr robusten ABS Kunststoff gefertigt. Der Terminal ist mit einem farbigen 5” Display mit hervorragender Deutlichkeit und einer Folientastatur mit 16 Tasten und frei programmierbaren Funktionstasten ausgestattet. Das speziell entworfene Menü ist an die individuellen Anforderungen des Bedieners anpassbar - für maximale Vereinfachung der Bedienung und beste Benutzerfreundlichkeit.

Optionale Akkuversorgung

Der im Terminal PUE C32 optional eingebaute Akku ermöglicht den Betrieb auch bei instabilen oder ganz fehlender Netzversorgung.

Kommunikationsschnittstellen

In der Standardversion ist der Terminal mit RS-322, USB-A und USB-B Schnittstellen ausgestattet. Die Schnittstellen unterstützen externe Geräte wie z.B. Drucker oder Computer, sowie den Datenaustausch mit Hilfe von USB-Datenträgern. Optional kann der PUE C32 mit einer Wireless Module Kommunikationsschnittstelle für eine Verbindung mit Funknetzen ausgestattet werden.

Datenmanagement

Das Informationssystem im Messgerät PUE C32 besteht aus 7 Datenbanken mit der maximalen Anzahl von Aufzeichnungen:

Produkte – 15 000
Benutzer – 500
Rezepturen – 500
Verpackungen – 500
Kunden – 500
Etiketten – 500
Universelle Variablen – 100

Die Datenbanken können mit der Verwendung von USB-Speichersticks importiert und exportiert werden.

ALIBI-Speicher

Der verwendete ALIBI-Speicher ist ein Bereich der Datensicherheit und erlaubt das Abspeichern von bis zu 100.000 Wägesätzen. Dies garantiert Sicherheit der Datenerfassung über einen langen Zeitraum.

Technische Daten

Display	5” grafisch farbiger
Abmessungen des Geräts B x T x H	206×140×71 mm
Verpackungsgröße B x T x H	300×250×130 mm
Nettogewicht	0,7 kg
Bruttogewicht	0,94 kg
Schutzart	IP 43
Gehäuse	ABS Kunststoff
Schnittstellen	2×RS232, USB-A, USB-B, Ethernet, 4 IN / 4 OUT (Digitalausgang), Wi-Fi^®
Stromversorgung	100 – 240 V AC 50/60 Hz
Optionale Stromversorgung	interner Akkumulator
Akku-Betriebszeit	bis zu 5 Stunden Dauerbetrieb
Max. Anzahl der Eichwerte	6000 e
Min. Spannung auf Eichwert	0,4 µV
Max. Spannung auf Eichwert	3,25 µV
Min. Impedanz der DMS-Zellen	50 Ω
Max. Impedanz der DMS-Zellen	1200 Ω
Versorgungsspannung DMS-Zelle	5V DC
Max. Signalzunahme	39 mV
Verbindung DMS-Zellen	4 oder 6 Kabel + Abschirmung
Umgebungstemperatur	-10 – +40 °C
Mehrbereich	JA
Max. Anzahl der Plattformen	1

* – optionale Ausführung

Videos

Komplette Wägelösungen für die Pharmaindustrie

Funktionen

Labelling

Marking products with the right symbols contributes to quick and reliable identification. The balance/scale usually transfers product mass or product quantity to the label printer. The transferred value is printed with the following information: bar code, pictogram, content, address etc. In laboratory the labelling is performed in a semi-automatic mode, for industry in an automatic one (dynamic scales).

Percent Weighing

Percent Weighing function is used for comparision of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly exceeded.

Totalizing

Function adding new mass value to already obtained one. This allows to determine mass content of the mixture, being a composition of number of different consistence components. Totalizing is limited by maximum capacity parameter.

Parts counting

Function using mass measurement for determination of measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass / single item mass = quantity. Function operation is supperted by a mechanism of Automatic Correction of Accuracy. This allows to update single item mass in course of the process. To a certain extend Automatic Correction of Accuracy eliminates error which may be a result of different mass values of seemingly alike single elements. For industry solutions items counting may be simultaneously carried out with checkweighing and dosing thus industry solutions feature audio signalling base informing that specified number of items has been weighed. It is possible to apply weighing systems using few platfroms of different MAX capacities and different accuracies.

Statistics

Statistiscs function registers and analyses performed measurements. This supplies the user withthe following information: Max and Min standard deviation, average value, variance, range et.

Checkweighing

Checkweighing function is used for checking whether the measured sample mass is within the predefined threshold values, Low [LO] and Hgh [HI]. The thresholds are given in [g] and [kg] units. Current state of a sample being measured is signalled by means of pictorgams located on a display for laboratory balances, for industrial scales Stackligt System is used. This visual +/- inspection is in operation during segregation, control or packing process of products for which mass has bees determined with a specifaied tolerance, eg. 12860 g ± 5 g

IR sensors

Programmable function supporting the weighing process through control of the following options: sliding weighing chamber doors, printout, zeroing, tarring etc. Especially appreciated wherever preventing the balance from soiling is important.

GLP Procedures

Diagnostic function allowing to objectively document performed measurements. GLP procedures may be either presented in a short report form or extended one.

Replaceable unit

Weight function to change the weight unit.

ALIBI Memory

"ALIBI" memory enables saving and storing up to 100000 measurements. Measurements are saved automatically upon each pressing of the key. There is no need for any additional operations or changing settings.
The following data related with the measurements is saved: measurement date; measurement time; result (mass); tare value; operator carrying out the measurement (logged in); product name.
The software saves the measurement in a so called loop, i.e. when the measurement no. 100001 is saved, the measurement 1 gets automatically deleted from the memory.
Measurements saved to balance memory cannot be deleted.
You can preview and print out the data saved to the ALIBI database.

Dokumentation

Datenblatt

Data Sheet

Details anzeigen

Download

Choose more product:

Details anzeigen

Download

Software

Drivers